If you have replaced the heating coil of your hot pressure washer, but it is still getting too hot, then it might have some issues that we need to take care of. Hot pressure washers are different from others in their breed. These require accessories like a heating coil and other temperature control features to keep the system running smoothly.
Generally, when we change any heating coil, we also need to replace the Insulation. Three types of Insulation usually keep the heating coil cooler: Blanket/ wrap Insulation, bottom/pancake insulation, and top hat insulation. If we missed it, the temperature would be higher, and you cannot use the hot pressure washer properly. Proper use of Insulation will keep your pressure washer running; without that, there is a risk of accidents.
How does Pressure washer burner insulation work?
As we have known before, heating coils do not work alone; they need Insulation to keep the coils cool and work for a longer time. Different manufacturers suggest different types of Insulation for their pressure washers, so we can check the user manual to understand what is the perfect fit. You can pressure washer heater coil repair, but it is better to replace
As mentioned earlier, three types of Insulation cover the whole heating coil from top to bottom. It works when the pressure washer burner and heating coil make the water hot instantly for spraying; the system becomes too warm. It needs a cooling system that handles to blow it; Insulation is the solution. We should use the marketing leading Insulation bands. So, when we need to handle the too many heating issues with the heating coil, we need to replace the hot water pressure washer burner insulation too.
What will happen if we do not replace the Insulation timely?
We can know two types of Insulation, vertical and horizontal, from the manual and specifications. Suppose we do not change the Insulation timely. In that case, there will be excessive heating factors as pressure washer burner coils and Insulation are related to each other for temperature control.
Pressure washer burner insulation changing processes
While changing the Insulation, we must follow a few steps. When the pressure washer crosses the general temperature range from 53°F to as much as 311°F, replacing the heating coil and Insulation is necessary. The changing steps are:
- Unplug the pressure washer from the power outlet.
- Unscrew the main cover of the washer.
- Loosen the bolts and screws to remove all the parts of the Insulation.
- Remove the washer coil and replace it with a new one.
- Install the Insulation safely as the coil does not break.
- Finish the full setup and test it with normal water.
Then you have to check the temperature level to see if that is not crossing the highest level. Hot pressure washer insulation is vital to keep our washer running smoothly. We have to remember that we need to use the correct type of hot water burner for pressure washers; anything that does not suit can cause an accident.
Things to consider for Pressure washer Insulation
Now we will talk about a few necessary things to maintain our pressure washer and Insulation. The heating coil and the Insulation have coils; never allow them to freeze. If you are in a cool place due to weather, keep the pressure washer in a warm place. When the coil is frozen, it will crack and will result in you having to replace the whole heating coil and insulator.
Another significant issue is running the hot pressure washer without water. If you do in 3-5 seconds, it will reach the highest temperature, start to backfire, and can cease. So, we should not run our pressure washer without water. If we have noticed that we have done it mistakenly, we have to shut it down as early as possible.
When you try to use the pressure washer in freezing weather, ensure that it is stored in warm weather. Or, when you start the hot pressure washer, the coil and Insulation may have already cracked. It will be a severe accident; the machine is going to blow.
So, when using a hot pressure washer, we have to carefully look after the temperature, heating coil, and Insulation condition. Blowing a hot pressure washer can significantly harm us, and we can get injured.
Short tips to keep Hot Pressure washer Insulation Safe
The maintenance is easy, and we can do that in a very few steps:
- Avoid cool places to preserve the pressure washer
- Always check the temperature graph when using
- Never use the pressure washer without water
- When replacing the heating coil, also replace the Insulation
- Keep the engine and machine clean
- Use clean and fresh fuels
These will keep your pressure washer in good condition.
FAQ
What is the most common problem with pressure washers?
Some common issues include breaking down, backfire, and malfunctions in a pressure washer. But the major issues are the heating coil, engine, and pup; we must keep an eye on those.
How do you winter-proof a pressure washer?
Generally, heating coil and insulation cracks in winter, and with frozen water, if we can winterize it, we can use it in winter. The process is easy:
- Use fuel stabilizer with gas
- Run the engine to circulate the fuel consumption for 2 minutes
- Keep the washer in a dry and warm place
Which brands are better for burner and heating coil?
There is a lot of burner and heating coil brand in the stores. Still, according to expert suggestion, we can use hotsy pressure washer burner and Landa pressure washer heating coil that may suit your system.
Final words
You will find every possible solution for pressure washer burner insulation, and you can use them in your practical life. These tips and guides can help keep your pressure washer running for a longer time and save money. Using the hot pressure washer safely is the best option to avoid accidents.
