Understanding How to set up a pressure washer easily.

A pressure washer is a machine that increases the water pressure from a house’s water supply to more than 1,000 pounds per square inch so that it can remove dirt and debris from objects. So, knowing how to set up a pressure washer before starting your cleaning will help you finish the task efficiently. However, you can effortlessly use pressure at your home, decking and fencing, and driveway.

We usually find two types of pressure washers around us: An electric pressure washer and a Gas-powered pressure washer. Electric-powered pressure washers are lighter and smaller, and it is convenient to use whereas gas-powered pressure washers are heavy and especially use for bulk jobs.

They no longer supply as much energy as a gas-powered unit, which clearly demands extra maintenance. Electric pressure washers are preferable to use outside and indoors, while you can easily use gas energy devices for outdoor cleaning tasks. It’s essential to install a power washer correctly and look at all the connections before starting any task.

Gas and Electric pressure washers

The setup techniques for the Electric pressure washer and gas pressure washer are mostly the same because they work in a similar method.

Electric powered washers can be used everyplace, unlike their gas counterparts. Because of emissions, it has been advised that gas-powered washers should operate in open zones to have airflow.

pressure washer set up in general

A pressure washer may be very easy to Setting, and there is no requirement for any additional instruments. Here are few techniques for getting started pressure washers

• Ensure the unit is on a horizontal floor and look at the water filter in place and free of rubbish. 

• Attach a garden hose to the machine, so you have access to your water supply.
• Next, connect the pressure hose that incorporates the washer into the water outlet at the machine. 

• If you have the RB 400, 600, & 800, slide the plug on the lowest of the gun rally onto the opposite side of the garden hose, ensuring the collar snaps into the appropriate position. However, the gun assembly should be screwed onto the other end of the high-pressure hose if you own the RB 200. 

• Pick the best-fitted nozzle for your washing project. To set up, Pull the collar on the end of the gun and wand rally.
• Set untied the collar and connect the nozzle, ensuring it snaps into the point securing the nozzle. Start the water.

• The hose will replenish with water, so it’s miles crucial to purge the technique of extra air earlier than switch on the machine. Just push the gun trigger, and the air will release.

How to set up an electric pressure washer safely?

Pressure washers aren’t only for Industrial/Commercial use, and electric-powered pressure cleaners are in call for getting used at homes as well. Electric pressure machines are small, flexible to move around, need much less maintenance, and feature the necessary power to deal with small washing tasks across the house.

While electric-powered washers aren’t difficult to use, but an electric-powered pressure machine may be complex to set up. And when you get your pressure washer, it may appear harsh to set up at first.

Electric pressure washer set up steps:

1. To assembly, prepare all the tools.

2. Remove all the packing materials from your pressure washer

3. Check whether you have an electrical connection or not

4. If there is no electrical connection, connect the wire to the pump

5. Connect all wires to their respective terminals on your pressure washer

6. Connect the water supply hose to pressure washer

7. Attach nozzle and trigger handle if not already attached

8. Fill the water tank with water

9. Install the wheels on your pressure washer

10. Connect hoses to fittings on your pressure washer

11. Attach the hose connection to the water supply line or tank, then connect that to a faucet or spigot for filling

12. Plug in your pressure washer and turn it on.

How to set up a gas pressure pressure washer?

Gas-powered pressure washer set up steps:

If you want to start a gas-powered pressure cleaner, the first thing that you should know is that you can do it by yourself. There are several ways to do this, and one of them is by using your engine. However, if you do not have an engine, you can still do it by using the pressure washer. Let’s figure out how to set up a pressure washer.

Make sure you’ve got the right gasoline and oil before starting your gas-powered pressure washer. So, now you’re equipped to start.

Make sure your fuel valve is in an open situation

 Pull the choke to the left side (the open situation).

• Ensure the throttle of your pressure washer is on the left side (the full-throttle situation).
• Rotate the engine switch and keep it in the “ON” position.
• keep the gun assembled on the holder and pull the engine rope.
• Then, close the choke, and you’re equipped to run your gas pressure washer.

Turn off the engine switch after finishing your work. To release the pressure, push the gun trigger after stopping the machine.

Next, Disconnect the water source and detach the gun and washer from the pressure hose, and then the garden hose

. Dispel as much water as viable from the hoses. After removing the nozzle from the gun, please keep it in the holder at the pressure washer machine.

How can you set up a garden hose to a pressure washer? 5 Easy Steps

Does your home, outside, the driveway have dirty & grime and require heavy cleaning to get out? Do you have home furniture that has chesty stains? Do you have a stinking garbage bin that has been left for a while now? Sure, you can wash all of these using a garden hose. To accomplish the work efficiently, it would be best to use a pressure washer with a garden hose But, how to fix a garden hose to a pressure washer machine?

Let’s find out!

Step 1 

Firstly, you need to choose at which rate the water flows through your tap call. You can measure it by GPM. Meanwhile, most of the pressure cleaner requires a water source which produces 3 GPM, So, your water source need to produce around 3 to 5 GPM

Under your tap call, you can put a kibble of three-gallon to measure the GPM (gallons per minute) of your water source. Then you can easily measure the filling time.

To make sure, you can repeat the mode three more times so that you can assume the uncertain time it takes to fill up a 3-gallon bucket.

It can feed water to a pressure cleaner if it takes less than 1 minute to fulfill a three-gallon bucket to the brim. Low GPM water sources can injury machines. You might expend much capital while repairing one. 

Step 2

If you’re taking into account the use of the pressure cleaner daily, a splitter is probably a superb instrument for you. It will help save you from the boring work of detaching your hose after using it. It might also additionally decrease the GPM of the water flowing in your machine, and you may open the opposite valve of the splitter as you operate the pressure cleaner. 

Step 3 

Next, you need to fix is the hose with the water inlet of the washer. Ensure the link is tight enough and there are no leakages. Then, join the opposite garden hose to the water supply. Recheck and ensure there are no leakages. However, If you identify any leakages at connecting points, you must block the leakage by any fitting.

Step 4

You have to connect the spray gun or wand with the high-pressure hose. Then you need to join the opposite end of the garden hose to pressure the washer’s water outlet.

Step 5

As soon as you finish the power washer and hose connection, you need to check whether your pressure washer works efficiently or not by spraying it on a particular surface or specific zone. Before spraying, ensure that there should be no barrier between the water source and the power washer. Push the trigger and let the water flow through the nozzle for a couple of minutes. Check all fittings are held tightly as loose fittings result in leakage.

Various Fittings That Can Be Set Up on a Pressure Washer

Usually, fittings help you to connect a garden hose to several parts of the power washer. So, if you already know how to setup a pressure washer, you should also know how various fittings can be be used on a pressure washer.

To enhance the hose length, it would be a great help for the user to use fittings. Moreover, the enhanced hose helps you to clean items away from a distance. In addition, you can use fittings to stop leakage from any hose.

In a pressure cleaner, you will have plenty of options to use different fittings. So, the fitting’s diameters may vary from each other. Moreover, those fittings can be made from different components like stainless steel, brass, plastic, etc. So, the cost of different fittings may vary as well: it depends on the components that have been used in making the fittings. So, once you need any fittings, you need to consider the diameter; else, this will not serve your purpose. 

What type of pressure washer to buy?

Light duty Best for

Light-duty pressure washers are the best selection to clean any lightly soiled surface, vehicles, home furniture, or bicycles. As it does not require expensive models and high-powered motors, light-duty pressure cleaners with low-powered motors in between 1000w to 1600w with low flow rates will be the best selection for this type of work. 

This light washer’s hose length may vary from 3 to 5 meters which helps you wash your car and other nearby surroundings. Few light pressure washer models have fixed nozzles that allow you to vary water flow pressure. As light washers are less powerful, it will make your cleaning work slow and get noise from motors.

Medium duty Best for

A medium-duty pressure washer is best for jobs like stripping paint, pressure washing decks, and siding, cleaning gutters and downspouts. The average household needs a 20–30-foot spray wand. That’s a little more than 1/3 of the length of a full-size sprayer. The job that most people want to do with a medium-range pressure washer is cleaning the driveway. The longer wand allows you to cover more area, but it’s also harder on your power unit. 

However, medium-duty pressure washers are more cost-effective than high-end ones. You can expect them to last longer, be easier to use and save you money in the long run. Most of these products are made with durable materials with 1,600W to 2,000W engines, which will not let you down. They also come with reliable motors that will not stop working as soon as you turn them on. You can also find a wide range of washers like Sun Joe or Greenworks, Karcher, and so on.

Heavy-duty Best for

Heavy-duty pressure washers are commonly used in agriculture and home cleaning, especially washing the dirt off tiles, carpets, and hard surfaces without damaging them. Moreover, heavy-duty pressure washers are also used for construction sites because they can be very useful in cleaning concrete, asphalt, brick, and stone.

The main advantage of using a heavy-duty pressure washer is that it has a high-pressure water pump that can produce more than 3000 PSI (pounds per square inch), which helps wash the surface’s dirt and dusty. The heavy-duty pressure washer has several accessories, and it is available in various models; the most popular ones are 4-stroke engines, 3-cycle engines, two-stroke engines. However, the main disadvantage of using a heavy-duty pressure washer is that it requires a large amount of water.

There are many types of heavy-duty pressure washers that we can find on the market today, like Karcher, Bosch, Stihl, and Nilfisk. 

Should I buy an electric pressure washer or petrol driven pressure washer?

The choice is yours, but you can’t go wrong with either. First of all, consider what type of cleaning is most important to you. For example, if you will only be using your pressure washer on one or two jobs a year, then it might not make sense to invest in a powerful machine.

On the other hand, if you want to tackle the most difficult jobs and get them done quickly, you might need something more powerful. You should consider the floor space, and if you are limited on storage, then it might be a good idea to look at models with wheels to be moved around easily.

The best pressure washer for you is the one that will serve your purpose easily. So, if you need domestic washing, you should go for an electric pressure washer. And if you are looking for industrial or commercial washing, you should go for a petrol power washer as this is pretty powerful and effective.

How much should I pay for a pressure washer? 

This is a tough question to answer. It depends on the size of your home, what type of surface you are cleaning and how often you need to clean it. If you need to clean a large area regularly, such as your driveway or deck, we recommend spending $300 and above for the best pressure washer. On the other hand, if you only need to clean small areas, such as your patio or small area of your house, then we recommend spending less than $300.

The most common features you should look for in a pressure washer:

Water tank – You want to be sure that the water tank is not too small, as this will limit how long you can use your pressure washer. If it is only 4 gallons or less, you will need a larger tank between 6 and 8 gallons.

• Pressure hose – The pressure hose should be long enough to reach the furthest areas of your house or property. If it does not, then this means that you will have to bend over when using the pressure washer.

• Pump – The pump should be powerful enough to create the pressure you need when washing your driveway, sidewalks, or other areas of your property. It should also have a good amount of power to not struggle during the winter months when the temperature is below freezing. 

• Start up and shut down buttons – You want to control the pressure washer from a distance so that you can start it, stop it or adjust the pressure while it is running.

• Water hose connection – It should have a hose connector so that you can easily connect it to your garden hose. 

• Pressure gauge – It should have a pressure gauge that allows you to see how much pressure is being used when washing your driveway or sidewalks with it. Moreover, while using it, you can see if the pressure status.

• Easy assembly – It should be easy for you to assemble and disassemble your pressure washer when not in use. You do not want a heavy, difficult-to-move unit that requires a lot of strength to move around. You also want a unit that is not too heavy and will be easy for you to carry.

Our Top Picks

Hope from the above discussion you can easily find out how to setup a pressure washer. Moreover, you can understand how much you should for a pressure washer or which type of pressure washer you should go for. Anyway, here we are sharing customer’s Top 3 pressure washers review in a nutshell for your more understanding.

Sun joe spx3000 review 

Best Electric Pressure washer

The Sun Joe SPX3000 is an 1800-watt electric pressure washer. Around 2030, PSI of water pressure can be produced initially by this pressure washer. Moreover, with minimum pressure, it can flow 1.76 GPM water with an open nozzle.

The Sun Joe SPX3000 can be used for various tasks such as cleaning your home, decking, driveway, and more. For those who need a powerful electric pressure washer, this Sun Joe SPX3000 pressure washer is the perfect suite for them to accomplish their task affordably yet efficient. 

The Sun Joe SPX3000 comes with a 20-foot hose and detergent tank to ensure that your pressure washer is in good working order and ready to go. This Sun Joe SPX3000 pressure washer is perfect for those who need a powerful electric pressure washer that is affordable yet efficient.

Specifications of Sun Joe pressure washer 2030

• Dimensions: 15.6 x 13.5 x 33.9 inches (L x W x H)
• Brand Name: Sun Joe
• Power: Corded Electric
• Pressure: 2030 PSI
• Flow: 1.76 GPM
• Weight: 31 Pounds
• Hose Length: 20 Feet
• Color: Green

Simpson Gas Pressure Washer

Best Gas Powered Pressure Washer

This compact gasoline pressure washer is Able to do quick cleaning jobs in no time at all. This compact gasoline pressure washer will allow easy access to hard-to-clean areas. And its 3-gallon tank provides enough power for a full day of work on the lawn or driveway.

This included a 100-foot hose that can be used to reach all parts of the house and garage. A 90-degree connection on the hose makes it easy to attach any garden hose for use in your yard or pool area. The cleaner comes with a complete set of guidelines that are easy to understand.

Specifications of Simpson 3400 pressure washer

• Dimensions: 22 x 13.5 x 29.25 inches (L x W x H)
• Brand: Simpson Cleaning
• Power Source: Gas Powered
• Color: Natural
• Pressure: 3400 PSI
• Hose Length: 25 Feet
• Flow Rate: 2.5 GPM

Westforce pressure washer reviews 

DESIGNED TO MANAGE ANY BUSINESS: This WestForce heavy-duty Electric Pressure Washer is equipped with 14.5 amp/1800-watt along with a copper motor that can produce around 3000 PSI of water pressure. It would be the perfect companion for renovating homes, buildings, cars, bikes, trucks, RVs, ATVs, boats, sidewalks, patios, yard equipment, outdoor furniture, swimming pools, terraces, plants, etc. Moreover, It can flow 1.85 GPM of water for amazing performance.

RELIABLE PERFORMANCE AND SAFE USE: ETL certified quality for a safe end and comes with a 35ft power cord with GFCI inline, making it safe to use on any outdoor outlet. 

STOP SYSTEM: To save energy for enhancing the life of the pump, the Motor shuts off if the trigger is not engaged. 

INTERCHANGEABLE NOZZLES: 5 quick connect nozzles with different types of jets of 0 °, 15 °, 25 °, 40 °Degree make the pressures variable for the specified washing tasks and the soap nozzle to disperse the soap on a surface for easier cleaning.

Specifications of westforce pressure washer 

• Dimensions: 23 x 12 x 12 inches (L x W x H)
• Brand Name: WestForce
• Power: Corded Electric
• Pressure: 3000 PSI
• Flow: 1.85 GPM
• Hose: 20 Feet

FAQ (Frequently Asked Question)

Is pressure washing effective?

Pressure washing can remove almost any dirt or stain from any surface and restore that fresh, like-new look. Whether you need the exterior of your business or a power wash at home, this is the real way to get a cleaner look.

Do pressure washers use a lot of water?

As mentioned earlier, pressure washers only use an average of 24 GPM of water. It’s pretty much the same as the household sink, which averages around 2.2 GPM. Compared to a tube that emits 24 GPM. Low GPM and powerful fast cleaning mean less overall water consumption.